Cisco IP Phones registered to CUCM 8.5 are able to keep 100 records for missed calls, received calls and placed calls. Is it possible to reduce the number of 100 records to 20 records?
Hi,We are running CUCM 6.X. Recently i add Nokia Call Connect Client trial ver on my Nokia E72 Device and was able to register to our Call Manger.But now i want to add Nokia E72 device as a SIP device to my Call Manager, but its not getting registerd...
Has anyone setup a single zone ValCom paging system to work with an h323 gateway? I was told by ValCom to use an FXO port according to the ValCom procedure I've attached to this post.Dialing the extension causes the lights on the FXO to light up, so...
Hi all,In our enterprise, Windows CA is being used and we are having problem using Windows CA with S&S. Windows CA is not accepting the CSR we generate from S&S and gives the following error: http://support.microsoft.com/kb/312344Your certificate req...
When I call inside... FXO-M1 card get Caller ID number ... but I still have message: "From Unknown CallerID"...Is it OK? Or I have some other options?Thanks in advance.
Is there anyway that I can create a job that will import client mattercodes on a nightly basis so the customer does not have to open the web page and go thru the process.. I just want to run a nightly job that will import a new csv file
Is there anyway that I can create a job that will update client mattercodes on a nightly basis so the customer does not have to open the web page and go thru the process.. I just want to run a nightly job that will update a csv fileTks
I just put in a new 7970 phone and the time and date are incorrect. Does anyone know where to change this? All other phones, 7940 and 7960 are correct.
I see on the documentation below that a 3945E router with proper DSP PVDM3 can handle up to 2,500 "SIP Sessions".Question:How many concurrent calls does that equate to? My understanding is that 1 session does not equal 1 call. http://www.edge1.net/ci...
From the Users Guide - 5/31/2011 Page 296It says we can create a Request Type Setinit.syslog=on&init.syslog_collector=<DMM_routable_IP>&mib.save=1&mng.reboot=1The above does NOT work on 5.2.3 4310 or 4400.Is this a bug?This does work and it sets the ...
I currently have created new content for my 4310 to run, but it is having some issues. At first I thought that maybe I had to much going on at once because I have a flash image slideshow, a rss feed, weather widget, and a date time clock all attempt...
We are receiving a flash player error on our 4400G DMPs. It says an object is causing a Flash 10 Player error, the dmp may run slowly or lockup. Have latest version of firmware installed. Only running an image slideshow on the dmps. The DMPs lock up....
I have 54 DMP-4400G media players deployed throughout our campus. Periodically, one of them will lose connectivity to the network and will not recover without a hard boot via cycling the power. We have investigated this for a while and do not see any...
Hi;We are configuring a Show and Share Workgroup server (part number sns-svr-c200wg-k9) for one of our customers, but I have one concern with this box. The server ONLY comes with a single 2TB drive, and does not seem to have any options for RAID co...
