04-24-2006 04:26 PM - edited 03-13-2019 01:02 PM
can you configure cisco call manager to work with subrate pri using MGCP. Customer got the PRI using 4 channels. Calls will not go through if you don't configure the call manager for all 24 channels.
04-24-2006 04:40 PM
Callmanager does not support fractional PRI with MGCP. Please see the following link for confirmation.
http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00801ad22f.shtml
Hope this helps. If so, please rate the post.
Brandon
04-24-2006 04:54 PM
Fractional PRI is not officially supported by Cisco, but you can do this. Check these previous posts
Regards,
Anup
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide