cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
209
Views
0
Helpful
2
Replies

NM-HDV w/ 1MFT-T1-24 and Leftover DSP's

adignan
Level 8
Level 8

Fractional T1 for voice. Can I allocate the remaining DSP's for conferencing/transcoding?

2 Replies 2

maharris
Level 5
Level 5

I think so - if you got the bundle with 2 PVDM-12s you have 6 dsps to divvy up - so I guess it depends on how many voice channels you need, and what you have left -

Allocation of DSP Resources

You must allocate DSP resources on two levels:

•Within the voice network module, between the DSP farm and your voice trunk group that handles standard voice termination

•Within the DSP farm, between transcoding and voice-conferencing services

Allocation of DSP Resources Within the Voice Network Module

You allocate DSP resources either to voice termination of the voice trunk group or to the DSP farm. Occasionally these allocations can conflict.

If you previously allocated DSP resources to voice termination and you now try to configure a DSP farm, you might find that insufficient DSP resources are available. Conversely, if you previously allocated DSP resources to a DSP farm and you now try to configure a trunk group, you might find that insufficient DSP resources are available.

If your requested configuration is rejected, you have two options:

•Insert more DSPs on the voice network module (NM-HDV or NM-HDV2)

•Allocate a different voice network module for either the DSP farm or the trunk group

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/vvfax_c/callc_c/ccm_c/intcnf2.htm#wp1040335

Mary Beth

rseiler
Level 3
Level 3

I answered a similar question in another post:

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dd648c8/0#selected_message

Look for the URLs, they have some relevant info.

Hope this helps...

/Rick