09-14-2004 10:19 PM - edited 03-13-2019 06:21 AM
Fractional T1 for voice. Can I allocate the remaining DSP's for conferencing/transcoding?
09-15-2004 09:02 AM
I think so - if you got the bundle with 2 PVDM-12s you have 6 dsps to divvy up - so I guess it depends on how many voice channels you need, and what you have left -
Allocation of DSP Resources
You must allocate DSP resources on two levels:
Within the voice network module, between the DSP farm and your voice trunk group that handles standard voice termination
Within the DSP farm, between transcoding and voice-conferencing services
Allocation of DSP Resources Within the Voice Network Module
You allocate DSP resources either to voice termination of the voice trunk group or to the DSP farm. Occasionally these allocations can conflict.
If you previously allocated DSP resources to voice termination and you now try to configure a DSP farm, you might find that insufficient DSP resources are available. Conversely, if you previously allocated DSP resources to a DSP farm and you now try to configure a trunk group, you might find that insufficient DSP resources are available.
If your requested configuration is rejected, you have two options:
Insert more DSPs on the voice network module (NM-HDV or NM-HDV2)
Allocate a different voice network module for either the DSP farm or the trunk group
Mary Beth
09-15-2004 09:46 PM
I answered a similar question in another post:
Look for the URLs, they have some relevant info.
Hope this helps...
/Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide