Problem about CallMananger Installation!!!Urgent!!!

[startryst]

My hardware platform is below:

HP DL320 G2 P4 3060MHz, partnumber:336549-002

I install CallManager from CD-Rom, I insert the first CD(Hardware Detction),everything is OK,but when Hardware Detction pass,the following screen display:

===================7825H02===========================

Please insert the CD titled:

OS_Disk3

This process will continue automatically after

detecting the correct CD.

=====================================================

but when I insert the OS_Disk3, CD_rom read for a while, and then seems not responding and this screen continue to display...

[dacole · Accepted solution]

Disk 3 is a DVD.

The Cisco build spec will show that you should have a DVD drive in this server.

It is possible to use a DVD drive on another pc to extract the files you need and then burn a CD with these files, but is probably simpler in the long term to just get a DVD drive in the CM server.

Dave

[startryst]

Dave, Thanks a lot, my problem has been solved