12-16-2003 07:30 PM - edited 03-13-2019 03:03 AM
Does the PVDM-XX(192K) can be used in 1760
12-16-2003 07:54 PM
Supported PVDM part numbers for the 1760 are:
pvdm-256k-4,pvdm-256k-8,pvdm-256k-12,pvdm-256k-16HD and pvdm-256k-20HD
12-16-2003 08:14 PM
I use a PVDM-12 in 1760, and it works, but I don't know if I can use it without problem in any case:
Packet Voice DSP Module Slot 0:
Hardware Revision : 3.2
Part Number : 73-3691-02
Board Revision : A0
Deviation Number : 0-0
Fab Version : 02
PCB Serial Number : ICP071307WD
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 02
Number of DSP's : 3
DSP memory size(in kwords): 192
Type of DSP : TMS320C549
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 01 5C 41 03 02 82 49 0E 6B 02 42 41 30
0x10: 80 00 00 00 00 02 02 C1 8B 49 43 50 30 37 31 33
0x20: 30 37 57 44 03 00 81 00 00 00 00 04 00 09 02 FF
12-17-2003 03:57 AM
Use the DSP calculator on CCO -
http://www.cisco.com/cgi-bin/Support/DSP/dsp-calc.pl
Product Number for DSP Modules
Number of DSPs Product Number
One PVDM-256K-4
Two PVDM-256K-8 or PVDM-256K-4U8
Three PVDM-256K-12 or PVDM-256K-4U12
Four PVDM-256K-16HD or PVDM-256K-4U16
Five PVDM-256K-20HD or PVDM-256K-4U20
Cisco 1760 Series Routers support maximum 10 DSPs by having two DSP module slots and supporting up to 5 DSPs in each slot
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide