"Dynamic" voip configuration on rotuers

[wmmak]

Hi all,

We have a large network, say over 50 sites and all using voip. The problem is when we add/delete one site, then we need to configure the dialing plan on all 50+ routers. Is there any dynamic way so that the routers can learn the dialing plan automatically or by means of central management?

Thanks and regards,

mak

[MLADEN MILANOVIC]

Well, I don't know how your network topology looks like but mabye GK deployment is a solution for you.

GK should be a central place for adding/deleting dial-plans entries. On the ending GWs you will have only most specific dial-peers.

Anyhow, did you already consider GK deployment ?

Mladen

[michael_davis]

If H.323 is a requirement, seriously consider adding Gatekeepers. Dial-plan is configured on the gatekeepers rather than on each gateway.

If H.323 is not required, and you have a call-agent such as CallManager, MGCP might be an attractive alternative. The dial-plan is configured on the call-agent/CallManager.