Speed problems with an ATA 186

[burki.net]

We need an Ata for servicing a machine remote. The connection is thru the ISDN to a 2821 to the ATA and then to the Modem. The speed is only 2400 bits. How can I speed up the ATA to 56k?

Thanks for helping!

[beth-martin]

Officialy modems are not supported on the ATA. I think nothing much can be done on this aspect and you need to check for other alternatives.

[burki.net]

What do you think about "other alternatives"?

[gsobeski]

we've been able to dial thru ATA's but you'll have to crank your baud rate down to like 38400 on the calling machine in order for it to work. I think you can pretty much rule out 56k.

[holzwaku]

Could you kindly let me know the config in the ATA and your IOS gateway that allowed the ATA's to work as a modem? We cannot get it to work no matter what we try. We're thinking of going with Linksys Sip instead to get this to work. Thanks for any help you can provide.