My customer has two locations, site A and Site B connected together by a 10MB Ethernet connection, with Site A having CallMgr 4.0.
Both sites have a PRI terminated into 2811 routers for incoming/outgoing calls.
Customer can do 4 digit dialing between sites when the WAN or Ethernet connection is up.
Now the customer wants to have users at Site B which has a 2811 with SRST configuring to continue to do 4 digit dialing to site A when the WAN or Ethernet connection drops. Can or how do I configure this for SRST?
The callmgr handles the 4 digit dialing today, but what happens when Site B goes into SRST mode?
We have tested SRST at Site B and we can dial out 7 or 10 digits using the PRI, but not 4 digits.
Any help would be greatful....