Upgrading UNITY 3.0 TO 4.03

[hwilms]

Hello,

My customer wants me to upgrade their Unity 3.0 UM to 4.03. Is it necessary to upgrade to 3.1 first or can I just Upgrade right to 4.03.

thanks

[lindborg]

You can upgrade directly to 4.0(3) no problem.

Here's a link to the 4.0(3) install guide for more details:

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_installation_and_configuration_guide_book09186a00801ba396.html

[hwilms]

keith,

I have downloaded 4.03 service pack CD 1, 2, 3, I can not find the AdSchemaSetup.exe. The upgrade instructions claim its on Unity CD1. If the Unity cd's that they purchased are 4.02 is it ok to use the AdSchemaSetup.exe on these cd's. My goal is to upgrade them from 3.0 to 4.03 latest version.

Thanks Keith

[jasyoung]

It's on the first Unity install CD, not any of the service pack CDs. It's in a directory off the root called ADSchemaSetup.

[hwilms]

Yea I relize its on CD1 of Unity, But when you buy Unity you don't always get the latest release. The other part of my question was is it ok to use the AdSchemaSetup.exe on a Unity 4.02 CD If I am upgrading to 4.03. Thanks for your feedback

[afuller]

You can download the first Unity install CD from CCO just like you can the service pack CDs.

And you should probably run the 4.0.3 adschemasetup. There's a new attribute added:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/unity40/relnote/cu403rn.htm#281826

adam