hi
I have a Remote with a 64K satellite connection. Need some suggestions in tweaking my frame relay traffic shaping etc to improve delay and jitter. Any suggestions welcomed. should i increase my Bc, etc
below is the config on the remote. The config on the far end is similar
thanks
interface Serial0/0
bandwidth 64
no ip address
encapsulation frame-relay
load-interval 30
frame-relay traffic-shaping
hold-queue 1024 in
hold-queue 1024 out
!
interface Serial0/0.1 point-to-point
bandwidth 64
ip address x.x.x.x 255.255.255.252
no cdp enable
frame-relay interface-dlci 601
class 64K
frame-relay ip rtp header-compression
map-class frame-relay 64K
frame-relay cir 64000
frame-relay bc 640
frame-relay be 0
frame-relay mincir 64000
frame-relay fragment 80
frame-relay ip rtp priority 16384 16383 48
frame-relay fair-queue