01-17-2003 04:10 AM - edited 03-02-2019 04:16 AM
Hi all, I've been trying to get a 7200 to recognise the above PA.
I've tried several Kboot images (12.1(8a)E, 12.2(2)T and 12.2(8)T5) various IOS's from 12.1(14)E to 12.2(8)T, T1-5 with no luck.
I/O controller is a 2FE/E and processor is a NPE400
PA has been RMA'd to no effect.
Any ideas?
Solved! Go to Solution.
01-17-2003 11:42 AM
To continue your PA-MC-8TE1+ port adapter installation, you must configure the card type as either T1 or E1.
The controllers will not be visible till the card type is configured on the PA. After configuring card type as T1/E1 on the PA, all the controllers are created as T1/E1.
The CLI to configure card type for PA-MC-8TE1+ port adaptor as T1/E1:
On 7200,7400 Platform:
Router#
Router(config)#card type
For additional information please refer to these links:
01-17-2003 11:42 AM
To continue your PA-MC-8TE1+ port adapter installation, you must configure the card type as either T1 or E1.
The controllers will not be visible till the card type is configured on the PA. After configuring card type as T1/E1 on the PA, all the controllers are created as T1/E1.
The CLI to configure card type for PA-MC-8TE1+ port adaptor as T1/E1:
On 7200,7400 Platform:
Router#
Router(config)#card type
For additional information please refer to these links:
01-18-2003 10:08 AM
Thanks, I'll try that and let you know how I got on.
Cheers
01-20-2003 01:05 AM
That did the trick!
Many thanks.
Ross
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide