ASA 5550 VPN Tunnel

[T_tow]

I was having trouble setting up a VPN tunnel coming from my ASA going to a cloud proxy.  When I put the tunnel up I loose connectivity with my test subnets.  I've gone through the config and believe it might be an acl or nat issue.  Anyone care to take a look at my configs? Thanks

[balaji.bandi]

How about other side config ? is phase 1 and phase 2 up ?

BB

[T_tow]

Well that's the thing the other side of the tunnel is a symantec cloud so it's configured different but as soon as I put in the tunnel and object configs the subnets lost internet reachability.

[Diana Karolina Rojas]

Hello!

You can try changing the ACL and doing a test first, instead of "BlueCoatCloud_traffic any" point only to the Cloud Proxy Ip address and see if this conection works ok.

Please do not forget to rate useful post.

Best Regards,

[T_tow]

Sounds good.  This is in our production so I don't want to tinker to much but this should work out fine I'll let you know.