Automated backup configuration of a Catalyst 6509

[p-delorme]

Hi all,

I would like to automate the backup of the configurations of our catalyst 6509.

Does anyone know a way to do this, using the snmpset command for example?

I don't have CW2000...

Thanks a lot for your help.

[rmushtaq]

There are a few tech tips for using this at: http://www.cisco.com/warp/public/477/SNMP/snmp-indx.html

[p-delorme]

Thanks for your help, but....

I already checked these links, but it's not very clear for the catalyst 6509...

in fact, if I use the snmpset command with the following OID: .1.3.6.1.4.1.9.2.1.55.xx.xx.xx.xx (xx.xx.xx.xx being the IP address of the TFTP server) it works for the routers, for Catalysts 35xx, and for the MSFC cards, but not for the 6509 itself. I got the followinf error message:

SNMP: variable does not exist

So, I guess I have to use another OID? but which one?

I don't even know if what i want to do is feasible...

If anyone has another idea, it will be more than welcome.

Thanks by anticipation.

[pboulo]

Take alook at this link I have used this before and it works for CatOS switches

http://www.cisco.com/warp/public/477/SNMP/move_files_images_snmp.html

If you need further examples let me know

[p-delorme]

great!!

everything I need is in there!

thanks a lot for your help.

Pascal