07-20-2005 05:58 AM - edited 03-02-2019 11:26 PM
Hi All,
the vlan, highdruid, is down, how is it brought up..? Cheers.
coolboarderguy...
Cool#sh vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/5, Fa0/7
2 highdruid act/lshut Fa0/1, Fa0/2, Fa0/3, Fa0/4
3 slick active Fa0/8, Fa0/9, Fa0/10, Fa0/11,
Fa0/12
07-20-2005 06:23 AM
Are all of the ports Fa0/1 - 4 all down at the moment? If so, that is why.
Kevin Dorrell
Luxembourg
07-20-2005 06:30 AM
Hi All,
well, 0/1 - 4 look no different to 0/7 - 12, yet, vlan 3 is active, and vlan 2 isn't...missed something..?
Cool#sh
00:56:35: %SYS-5-CONFIG_I: Configured from console by consolevlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/5, Fa0/7
2 highdruid act/lshut Fa0/1, Fa0/2, Fa0/3, Fa0/4
3 slick active Fa0/8, Fa0/9, Fa0/10, Fa0/11,
Fa0/12
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0
Cool#sh ip int brief
Interface IP-Address OK? Method Status ProlVLAN1 192.168.168.2 YES NVRAM up up
VLAN2 unassigned YES unset administratively down dow
FastEthernet0/1 unassigned YES unset down dow
FastEthernet0/2 unassigned YES unset down dow
FastEthernet0/3 unassigned YES unset down dow
FastEthernet0/4 unassigned YES unset down dow
FastEthernet0/5 unassigned YES unset down dow
FastEthernet0/6 unassigned YES unset up up
FastEthernet0/7 unassigned YES unset down dow
FastEthernet0/8 unassigned YES unset down dow
FastEthernet0/9 unassigned YES unset down dow
FastEthernet0/10 unassigned YES unset down dow
FastEthernet0/11 unassigned YES unset down dow
FastEthernet0/12 unassigned YES unset down dow
Cool#
07-20-2005 06:38 AM
True. The only difference I can see is that you have a management interface on VLAN 2 that is down, whereas you don't on VLAN 3. Maybe it is soemthing to do with that. Try creating an administratively-down management interface for VLAN 3 and see if it behaves the same way.
BTW, which VLAN is F0/6 on?
Kevin Dorrell
Luxembourg
07-20-2005 06:52 AM
What makes you say VLAN2 is a management VLAN(or has a management interface)..? I certainly didn't do anything to make it such. Can you point out where that is, and how to rectify it.? Cheers.
coolboarderguy...
07-20-2005 07:06 AM
It's the line in the show int brief that says VLAN2 unassigned YES unset administratively down down. When you do a show run, can you see an int vlan 2? If so, you can get rid of it with a no int vlan 2. Looks like it is a zombie anyway, cos I can see your active management interface is VLAN 1.
Kevin Dorrell
Luxembourg
07-20-2005 08:49 AM
Try going into the vlan database , config t, vlan database , type vlan 2 state active . Looks like it got shutdown somehow .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide