04-28-2005 12:19 AM - edited 03-02-2019 10:36 PM
Hello,
i want to migrate from CATOS 6.3.3 to IOS.
hardware :
1000BaseX Supervisor WS-X6K-SUP1A-2GE
Multilayer Switch Feature WS-F6K-MSFC
1000BaseSX Ethernet WS-X6416-GE-MT
10/100BaseTX Ethernet WS-X6348-RJ-45
Can i migrate with this supervisor and msfc to IOS?
I can't extract the correct infotmation from the table 2. Hardware Modules from
http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a00800c8441.shtml
Solved! Go to Solution.
05-02-2005 04:18 AM
You have an MSFC as well. So you can convert to Native IOS. The file names would start with c6sup11-xxxxxxxx.bin
04-28-2005 05:12 AM
Yes.. You sure can convert to Native IOS and all cards listed above will be supported in Native IOS.
05-02-2005 02:46 AM
Oh,
i forgot the L3 Switching Engine WS-F6K-PFC.
Can i anyway migrate to Native IOS?
05-02-2005 04:18 AM
You have an MSFC as well. So you can convert to Native IOS. The file names would start with c6sup11-xxxxxxxx.bin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide