checking on a Gigabit copper port

[axfalk]

We have got a stack of 4 Cat-3524 switches that are connected via copper among themselves (through GB 0/2) and the first & the last switches also via fiber (GB 0/1) to the core . Since GB0/2 has actually 2 ports, how do I check on the individual ports in GB 0/2 ?

Thanks.

_ Alex

[e.systems]

Try "Show interface Gi 0/1?" to show any possible options to type, I do remember being able to look at individual ports on the gigastack card but it was a long time ago.