07-18-2004 06:51 PM - edited 03-02-2019 05:09 PM
New Cisco 3660 router powers on but does not boot up. Does it require a PCMCIA flash card to boot up ?
07-18-2004 07:09 PM
hi
Try connecting via console and chek where it exactly hangs up.if it hangs on and comes to rommon prompt then u need to upload appropiate ios either via tftpdnld or xmodem.
try this xmodem recoery ..
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008009433b.shtml#image
regds
prem
07-18-2004 08:44 PM
hi,
The router does not hang up, infact there is no output whatsoever when i connect via console. Further more the system led does not light up indicating that the router isn't booting.
cheers
darshan
07-18-2004 11:03 PM
hi
I would better suggest to get in touch with u r H/W vendor since its a new box.
regds
prem
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide