Cisco eXpandable Power System 2200

[TTMan12]

Hello,

I have a XPS 2200 on hand and I was wondering if power supply PWR-C1-715WAC-P is compatible with the XPS 2200 as we dont have the  correct part number/power supply referenced in the doc for the XPS. The PWR-C1-715WAC-P is for a C9300.

XPS Correct Power Supply / Part Number

IE : C3KX-PWR-1100WAC= , C3KX-PWR-715WAC= , C3KX-PWR-350WAC= 

https://www.cisco.com/c/en/us/td/docs/switches/power_supplies/xps2200/hardware/installation/guide/xps2200hig/higoverv.html

[balaji.bandi]

check the below guide :

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-9300-switch/217759-configure-and-troubleshoot-stackpower-an.html

[Georg Pauwen]

Hello,

this is what I found:

C3KX-PWR-715WAC: It is designed to be used with the Cisco Catalyst 3K-X series switches and is not compatible with Catalyst 9300 switches.
PWR-C1-715WAC-P: It is designed for the Cisco Catalyst 9300 Series switches and is not compatible with Catalyst 3K-X series switches.

[Leo Laohoo]

---

@TTMan12 wrote:
I have a XPS 2200 on hand

---

Throw it out.  

As far as possible.  

XPS does not work in real world scenario.

[DanielP211]

Hello!

Short answer - NO. The power supply in question would be compatibile with the C3750X series switches and not with the newer catalyst 9000 series.

BR