cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
938
Views
0
Helpful
8
Replies

CW for Windows web server

htctech
Level 1
Level 1

Hello!

I have CiscoWorks for Windows 6 installed on W2K SP3. This is a new install of CW6. I can use CW locally on the W2K box, but not remotely. What is strange about it is that when pointing to http://W2Kbox.AnyURL.com:1741, it resolves to http://W2Kbox:1741 both locally and remotely. I realize that this is why I can't view it remotely, but how do I fix that? Remotely, I get the "page cannot be displayed" type errors. There is no problem viewing other web pages on the W2K box remotely...just CW.

Thanks in advance.

8 Replies 8

rmushtaq
Level 8
Level 8

CWW 6.0 does not support Windows SP3. The default http port is 80, http://:80. When the standard HTTP port (port 80) is used by other applications, CWW installs the web server on port 1741

Are you using htp://:1741 to access it remotely?

Yes, I am using port 1741 because port 80 is in use by other applications. It reacts in the same manner whether I use the IP address or the machine name, which is registered on our DNS server. Is there some kind of patch for this? Other applications that I am running on this machine require SP3, so I cannot uninstall it.

There is no patch for this. You can try doing a re-install if that's possible or try installing it on another box to see if that helps.

I've tried to reinstall it a few times. I suppose I'll have to put it on another machine. Do you think that there will be patch released?

Thanks for your help.

Resolved! After putting it on another machine without SP3 and getting the same result, I spent more time looking around at files. I found that the httpd.conf file (\lib\web\conf\httpd.conf) had the server listed as just "W2Kbox" instead of "W2Kbox.AnyURL.com". I changed this and all is resolved.

CWW 6.1 is the latest right now. You're using 6.0

htctech
Level 1
Level 1

OK...now I've tried it on a win98 box with the same results.

This is weird because you do not need to modify the httpd.conf file every time you install CWW, the installer automatically takes care of this. You may need to contact TAC to troubleshoot this further.