Other Network Architecture Subjects

Apologies in advance for the rather long winded nature of this message. Hopefully you'll understand what I'm talking about.We have a Cisco RSA Ace/server remote access system. On the outside of our network is a 2600 router which is connected to our f...

hi all, routers have "ip rcmd" to configure rcp and rsh. And we will do "rsh", "rcp" inenable mode with router. How to configure the both routers one rsh server and another rsh clinet to execute rsh or rcp between routers.best regardsfred.

I have several unused 24 port 10/100 ethernet cards in a 5500 chassis. Will these cards work in a 6500 chassis?

This line of configuration translate tcp 172.18.22.102 port 4200 x25 23421230223503 quietTranslates winsock opening port 4200 to the x25 NUA.During the process the following bytes are returned to the IP host and cause the application to fail.ff fb 01...

Can 5 switches perform daisy-chain design?2950T |2950T -- | |2950T | | |2950T | ---> 1000BaseT | |2950T | | |2950T --Consider above design Is it work? Thank YOu Hato

Hi,I need some info on the 3620 supported traffic levels with the 2FE2W module. Testing it for use in a backup environment without ACLs I have reached 17 Mbps sustained traffic level, CPU usage tops 30 %, that drops to around 4 Mbps, CPU tops 10 % us...

Can I trace the source of the NAT traffic? My customer has some remote sites connected to an untrusted network before linking back to HQ. The traffic is NAT before entering HQ. The customer is thinking of tracing the source address of those machines ...

Hi all, After reinstalling CW2000 due to a hard disk failure I keep getting error messages: (EssentialsDbmonitor) cannot connect to 'rmeDb' database. Also, (CmfDbMonitor) cannot connect to 'cmfDb' database. I installed it on Win2000 advanced serv...

I'm interested in what are differences between the multicast and broadcast in term of speed.When a router or switch is used what messages would be delivered / multicast or broadcast?

there are two router on one segment, can each router use helper address for same DHCP or other DHCP server ?what happen, above situation.i wonder something such as loop or any other problem on this case.

Hi ,I have a query about Macintosh systems being able to print to print devices on subnets opther that the physical subnet the mAC is on. We are not allowed to run Appletalk Routing. Ok , so the problem is this . Say there is a MAC on the subnet 10.1...

Hellowhere can I find detailed information for the DickTracy Tool? Thanks for any information.Rolf

Other than having a 6509 spare in a disaster recovery plan, what other measures can be implemented in disaster recovery for the catalyst 6509.

What is the Difference Between WS-X6348-RJ45V and WS-X6148-RJ21V?

I have 2 2912 running IOS 12.0.5.2(XU) and both crash with hyperterminal. Whats the recommnded IOS for these Switches