06-29-2005 03:30 AM - edited 03-02-2019 11:14 PM
Hi,
Since short I receive the following message once and a while.
Jun 29 09:03:27.459 CEDT: %SCP-4-DACK_TIMEOUT_MSG: SCP delivery ack timeout for opcode=11D
Jun 29 09:09:49.510 CEDT: %SCP-4-DACK_TIMEOUT_MSG: SCP delivery ack timeout for opcode=11D
According the Cisco.com Error Message Decoder: Error Message Decoder
1. %SCP-4-DACK_TIMEOUT_MSG: SCP delivery ack timeout for opcode=[hex]
This message indicates that the route processor did not receive SCP delivery acknowledgements from the switch processor after two retries. [hex] identifies the operational code.
Thanks for any insight about the cause I receive this? (hardware issue, software issue? something caused by a direct connected device?).
Peter Abbeel.
06-29-2005 04:30 AM
Can you paste output of sh mod from the Supervisor so that we get to know hardware type of Sup/MSFC and the CAT OS/IOS version you are running.
06-29-2005 04:47 AM
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC no standby
2 2 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes standby
16 2 1 Multilayer Switch Feature WS-F6K-MSFC no ok
3 3 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
4 4 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
6 6 24 100BaseFX MM Ethernet WS-X6224-100FX-MT no ok
8 8 8 1000BaseX Ethernet WS-X6408A-GBIC no ok
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ---------- -----------------
1 00-30-96-b0-92-1e to 00-30-96-b0-92-1f 3.3 5.3(1) 7.6(4)
00-30-96-b0-92-1c to 00-30-96-b0-92-1d
00-d0-01-53-2c-00 to 00-d0-01-53-2f-ff
15 00-d0-bc-f4-ab-6c to 00-d0-bc-f4-ab-ab 2.0 12.1(20)E 12.1(20)E
2 00-30-7b-91-10-26 to 00-30-7b-91-10-27 3.1 5.3(1) 7.6(4)
00-30-7b-91-10-24 to 00-30-7b-91-10-25
16 00-30-7b-91-10-28 to 00-30-7b-91-10-67 1.3 12.1(20)E 12.1(20)E
3 00-b0-8e-82-1b-64 to 00-b0-8e-82-1b-93 1.1 5.3(1) 7.6(4)
4 00-02-fc-60-6f-c0 to 00-02-fc-60-6f-ef 1.1 5.3(1) 7.6(4)
6 00-d0-d3-a5-07-8d to 00-d0-d3-a5-07-a4 2.5 5.4(2) 7.6(4)
8 00-01-97-25-05-8c to 00-01-97-25-05-93 2.0 5.4(2) 7.6(4)
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw Sub-Sw
--- ----------------------- ------------------- ----------- ------ ------
1 L3 Switching Engine WS-F6K-PFC SAD04010BZX 1.0
2 L3 Switching Engine WS-F6K-PFC SAD041201C2 1.1
07-04-2005 02:11 AM
Hi,
Any news regarding this issue?
thanks a lot,
Peter Abbeel.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide