09-20-2006 12:29 PM - edited 03-03-2019 05:08 AM
If a port is configured with dot1x port security and option AUTO, are any protocols allowed threw the port prior to authentication ? e.g. CDP, MDH5 vtp
09-20-2006 01:42 PM
I just tested in the lab. I have a switch connected on port fa 3/1. as soon as I enabled dot1x I don't see the switch in show cde nei. So none of the traffic are passed.
09-20-2006 02:16 PM
What kind of traffic send 802.1x (unicast,which dest IP@, which source IP@, do you have some capture for example in ethereal for this protocol?
Thanks
09-20-2006 02:21 PM
Thanks for your response. I wrote the BCMSN CCNP certification and it asked this question. The problem is that it was multiple choice and none of the options where no traffic is passed. I was very confused by this and still wondering why they would only have options to pick which protocol would pass.
09-20-2006 07:24 PM
before the port is authenticated,eapol protocol can pass the port
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide