05-09-2003 01:37 PM - edited 03-02-2019 07:14 AM
I need to configure a pair of Cisco 3600 routers that will be used to connect multiple point-to-point T1s between two of my locations. They will be used to pass replication traffic between the sites. At this point, my thoughts are to put all interfaces from both routers in the same EIGRP group and hope that this will be enough to make them load balance the traffic crossing them.
Is there a better way to do this? I have never configured routers for this purpose before and would appreciate any assistance, TAC articles, etc. that you could provide me.
Thank you,
Justin Loucks
05-09-2003 04:49 PM
A better way (IMO) if the T1's terminate on the same router at a given site is to use Multilink PPP to effectively combine the T1's into 1 virtual pipe.
05-10-2003 04:18 AM
I like this idea. Can anyone suggest some good reading (Books, TAC articles, examples, etc.) on the Multilink PPP technology?
05-10-2003 08:42 PM
Try the following URL for info. If you search CCO, there are many more examples.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide