Other Network Architecture Subjects

Can a Cisco 3600 router be programmed to route based on line condition? If so, how? Here is our situation...Right now we are using one T1 circuit for all of our Internet traffic. Our Cisco 3600 router sends all traffic to our firewall, which acts as ...

Hello, I have a LAN consisting of two interconnected cat 6009 backbone switches. I have cat 3500 series as edge switches connected to the backbone switches using fiber uplinks (GBICs). I've configured several VLANs with HSRP on the 6009's. All the ...

The MSFC2 sometimes sends small packets with the destination port 0xB00 to many destinations. The following is the netflow data:DstIP Protocol SrcPort DstPort ToDPkts FmDPkts ToDOctets FmDOctets MID12.215.91.115 1 0 2816 3 0 168 0 112.221....

We are using the CWLMS 2.1 in our Cat 5000 environment and I am looking to create a repository for all the switches configs in case the CWLMS 2.1 is out of the water since the format in which the CWLMS 2.1 is CSV and can't be read with a regular text...

I have a quick question. Does any one know the purpose of the private-config and underlying-config on cisco routers?

Please contact me if you have any exprience with BBSM SDK to add new currency type ( TL ) on Webconfig page.sezen.sarbay@ncr.com

I am running ver. 3.2 of path analysis – notices odd behavior – when I do trace from a Unix box to Unix box that are on the same VLAN – layer 3 info looks ok. When I do a trace form Windows server to Windows server that are on the same VLAN the laye...

We recently updated community strings on our devices. We also updated CiscoWorks with the new community strings under Server Configuration -> ANI Server Admin -> SNMP Settings. We also updated the community strings in RME for each device.Everything...

I need to export only automated action and filter messages from RME.How do I get this?

We have a high cpu utilization problem on our Internet 7206 router. Here is the output of sh proc cpu:CPU utilization for five seconds: 93%/92%; one minute: 93%; five minutes: 92%As you can see, the high CPU utilization is caused by interrupts (92%)....

I have 2 questions:1. Can you use VHM to monitor DSP's on VG200's.2. Can you use VHM to monitor DT24+ and AS4 Analog gateways.I am monitoring a CallManager that has 2 DT24+ and 2 AS4 analog and AS4 Digital gateways. I am getting a constant CRITICAL ...

I need to keep copies of the configuration for a router that is on a secure segment of my network. Thus I want to provide as little access to the router as possible through telnet and snmp. In reading all the TAC Authored Notes on RME and transport p...

I am recieving an error when I attempt to open CiscoView on a 7206 Router through Tivoli NetView - Error is as follows \\192.xxx.xxx.xxx 7000/dd/c7206.dd Cant read "DD(C7slotlist)": No such element in array \\ Any help would be appreciated.Thanks,Ste...

Hi,What implications can activating BackboneFast/RSTP have on switches in a production environment?The thing is I have to lower the convergence time of STP.The connection topology is the following:A ->B->C->D->AA and B are core/distribution connected...

Hi,When I push ACLs down to my routers, all remark and permit are re-arranged. Are there any tricks to this ? or I'm missing something. It works for other people using the same server. Example: on Netconfig templateno access-list 21access-list 21 rem...