04-30-2004 03:20 PM - edited 03-02-2019 03:24 PM
I have 8 Catalyst6509, and I want monitor when the topology change (STP). I have 10 VLANs.
Can you tell me which is the MIB and where can I find it? How Do I configure it?
Last time one fiber module failed but no logging any menssages in buffer. the snmp and logging buffered is confured.
Do you know how can I configure de c6509 to send all traps for hardware problems?
I Have HP OpenView for Unix.
Sergio
04-30-2004 05:00 PM
Assuming that it's on CatOS, you can look at:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa1.shtml and enabled traps that you're interested in. The bridge option in traps also enables the topologyChange traps. The matrix above also lists the hardrware related traps.
05-02-2004 06:39 PM
Anyone know how to poll cpu & backplane utilization on a cat6500 running catOS?
thanks
Aurelio
05-03-2004 06:47 AM
Hi friend;
I have C6509 with IOS 12.1(11b)E.
Thanks for your help.
Sergio
05-04-2004 12:47 PM
Lots of great links here:
http://www.cisco.com/en/US/partner/tech/tk648/tk362/tk605/tech_protocol_home.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide