need snmp set/get for port duplex on cat 4506 running IOS

[cschaeffer]

What is the SNMP OID that supports get/set of the port duplex on a catalyst 4506 running IOS Version 12.1(20)EW2 ? Also, is there an OID that allows the port speed to be set (including auto)?

[rmushtaq]

dot3StatsDuplexStatus from the ETHERLIKE-MIB.

[cschaeffer]

That is a read-only OID. How do I set the duplex (and speed)

[cnoctools]

Check out:

.1.3.6.1.4.1.9.5.1.4.1.1.10.. for the duplex setting for a port.

Integer Values can be:

1 half

2 full

3 disagree (when the port was auto and it can't agree with host)

4 auto

.1.3.6.1.4.1.9.5.1.4.1.1.9.. for the 'desired' speed of the port.

Integer Values are the number of b/s of the port or 1 for auto. e.g. 100MB would be '100000000'

HTH

Dan.

[cschaeffer]

Those OIDs are portDuplex and portAdminSpeed from the portTable MIB. Unfortunately, they are not supported by IOS on the catalyst 4500's.