02-04-2005 06:05 AM - edited 03-02-2019 09:29 PM
I've some questions about jumbo operation in my mind:
1.What about communication between hosts with and without jumbo configuration sitting in the same vlan?
2.What about communication between hosts with and without jumbo config on different vlans? Supposing these vlans connected via an 6500.
Best RegARDS.
02-09-2005 06:51 PM
These links may be of use:
http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00801350c8.shtml
Let me know if I can be of any more help.
02-12-2005 12:22 PM
Thanks for your reply. Let's suppose this scenario:
Host A with MTU 9000 set, connected to a switchport jumbo enabled. Host B MTU 1500, on an vlan other than Host B.Those vlans ended on a 6500. What aboutthis communication? What may go wrong?
Regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide