cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
357
Views
0
Helpful
4
Replies

Routing Protocol

caijunjie
Level 1
Level 1

Hi

That say I have 3 router and I want to enable RIP routing protocol. Do I have to configure RIP on all 3 router ?

PLs advice. THanks in advance..

4 Replies 4

thisisshanky
Level 11
Level 11

Yes, thats correct. You have to enable on all 3.

router rip

network x.x.x.x

version {1|2}

HTH

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

Thanks for your advice.

sumanthmyneni
Level 1
Level 1

Hello,

On three of your routers,you need to configure rip.In rip there are two versions.version 1 will be accepted where vlsm is not used.vr.2 can be used where vlsm is used.hope you wouldn't use vlsm,so rip ver.1 will have to be configured on all the 3 routers

amikat
Level 7
Level 7

Hi,

Strictly saying you do not have to configure on all 3 routers. For example you can have static routing between 2 of them and do redistribute static to RIP in between.

Review Cisco Networking for a $25 gift card