10-04-2002 05:03 AM - edited 03-02-2019 01:50 AM
I have just upgraded my CiscoWorks to CD Five LMS 2.1 I thought that this would add my IOS 4006 SupIII switches as supported devices. However it seems that they are still not supported. I don't know what to do. I looked at the IDU 1.0 for CD 5 and they doesn't seem to be included either. Any sugguestion.
10-04-2002 10:10 AM
RME 3.4 by default supports Cat4K SUP-III per Supported Device List for RME 3.4: http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/cw2000e/e_3_x/3_4/dev_sup/e3_4.htm
Campus Manager 3.2 supports SUP-III only if IDU 1.0 is installed:
http://www.cisco.com/cgi-bin/tablebuild.pl/idu10
Is that what you're looking for?
10-10-2002 06:34 AM
I also have CW2000 5th Edition on windows with all of the patches and IDU for RME but the problem is that the ANI server does not support the device type. After discovery, the device type shows up as CiscoProducts.448. The Pkg files for Cat4000IOS (ver 2.0) and Switchaddlets (ver 1.11) are installed.
What appears to be NOT happening is the device ID mapping for the OID (.1.3.6.4.1.9.1.448) is not updated as seen when the ANI server is analyzed.
10-10-2002 10:37 AM
Having the the same issue.
I have CW2000 5th Edition on windows with IDU 1.0 for RME but after discovery, the device type still shows up as CiscoProducts.448. Campus Manager still shows a question mark.
10-11-2002 07:09 PM
You should implement the Incremental Device Update (IDU) 1.0 on Campus
Manager 3.2
You would need IDU on CM for add supported devices on Topology Layout within Campus Manager.
10-12-2002 11:30 AM
Campus 3.2 only supports SUP-III if IDU is installed. You can get the IDU for both RME and Campus Manager from:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide