02-28-2006 05:29 AM - edited 03-03-2019 02:02 AM
3750 stacked switch
interface gig 1/0/1
no switchport
no ip address
channel-group 1 mode on
interface gig 2/0/1
no switchport
no ip address
channel-group 1 mode on
interface port-channel1
switchport trunk encapsulation dot1q
switchmode trunk
since this will have 2Gbps trunking link to the core switch, even if 1 link fails other like will still connect with 1Gbps, so is this possible? because i tried this option in the "port-channel1 interface" this command is accepting.
earlier the trunking was configured in the gig 1/0/1, since i wanted more bandwidth, i thought i will put etherchannel.
02-28-2006 05:39 AM
Hi,
Yes, this is a possible and supported configuration, since you are using mode "on." Cross stack LACP is supported as of 12.2(25)SEC.
HTH,
Bobby
02-28-2006 05:45 AM
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide