Wake on Lan configuration (Cisco Router/Switch)

[Kepler]

Hi all.

I need to configure wake on LAN. (I have just 1 router 890, and 1 switch 2960).

Can configure WOL without some server? I mean, can I generate a "magic packet" on the cisco switch or the cisco router? 

if it is possible, give me the example of configuration commands, please.

thank you.

[Kasun Bandara]

HTH

https://community.cisco.com/t5/other-network-architecture/wake-on-lan-feature-how-to-enable/td-p/512201

https://community.cisco.com/t5/switching/wake-on-lan-through-a-cisco-device/td-p/2115301

[Richard Burts]

As I read the original post I was thinking that it was not possible to generate the magic packet from a router. It is quite possible for a router to forward a magic packet which was generated by a server to a remote destination, and this is what the first link provided by KB describes. But the second link provided by KB does describe being able to generate the magic packet on a router. So +5 for finding that.

The link describing how to have a router generate the magic packet does identify some requirements "You Must have an ios that Supports tclsh and has The udp Library. 15.0 at least" I wonder if your 890 has these?