What Process is VUR_MGR?

[ganeshp]

What process is VUR MGR on WS-C3550-12T switch/router? It hits 100 % cpu hit until routing table being manually cleared ?

Mar 10 10:32:09 CCT: %SYS-3-CPUHOG: Task ran for 4892 msec (2/0), process = VUR_MGR bg process, PC = 188994.

I was not able to find anything on VUR_MGR at cisco web site.

[donewald]

This is DDTS CSCds16630. VUR is the Unicast Routing Manager.

Hope this helps you,

Don

[ganeshp]

Don, thanks for the reply.

When check the CPU utilization it was 99% and VUR MGR process was using around 98 % - causes network to be slow. It 's effecting the performance. I wonder why the tac says it harmless - when i checked in CSCds16630.

Is that possible for you to give me some clue why could the VUR MGR process hits 98 % and how to overcome it.

Thanks in advance.

Regards,

Ganesh

[ganeshp]

Don, may be i better include this.

When cleared the routing table manually the message

" Mar 10 10:32:09 CCT: %SYS-3-CPUHOG: Task ran for 4892 msec (2/0), process = VUR_MGR bg process, PC = 188994. "occurs.

But prior to that the CPU utilization was 99% and VUR MGR process was using around 98 % .

That's the reason we cleared the routing table.

Thanks.