Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I understand its not recommended to redistribute using route-map and ACL in NX-OS.The recommendation is to use prefex-list.Its known as a bug :CSCtt04685.Any details when this bug would be fixed? or there is no plan for it?Thank you.
Hi,My network consists of 2 sites (A & B). Both sites each have 2 units of Cisco 6506 switches. Between Core1 & Core 2 both are running HSRP.All the active gateways are at Core 1 & standby at Core 2. Both sites are connected via DWDM which physicall...
Hi,Initially my customer was connected to frame-relay network running eigrp. Isdn was used as backup.Then we migrated to MPLS network. When leased-line is up all the routes are learnd via eigrp. Then when we shutdown the serial link, the isdn which w...
Hi There is 2 units of 7206 router (ver 12.3(8)T )serving 200 connection to remote routers. Last friday I've uploaded the 2 units of Router 7206 with New IOS 12.3(14)T2 and found it takes about 10 minutes to learn the eigrp routes and established ips...
Hi,Each time I try to insert the VPN Acceleration Module 2 (SA-VAM2) into the Cisco 7206 router, i'm keep getting this error.:43:09.438:: %VPN_HW-1-INITFAIL: Slot 6: No response to download in 50000 milliseconds:43:09.438:: %VPN_HW-6-SHUTDOWN: VAM2 s...
It's difficult to get downtime to revert back. But whenever the routers are being reloaded it takes long time to learn the new path /route, even with the old ios. But it never have been relearning the whole route process in while the routers is worki...
Hi,Don't we need to enable "frame-relay traffic-shaping" on the the interface s0?It's is missing from your sample config.I need to enable traffic-shaping on both (HQ & remote) routers, right?
Hi,Really appreciate your help.Just to confirm,Do i need to put the path mtu discovery only on the LAN interfaces which involve in DLSW or WAN interfaces as well?By applying the traffic shaping on my 2 sub interfaces at my remote routers, will the ba...
