04-13-2006 02:50 AM - edited 03-03-2019 02:48 AM
Hi, i've heard briefly of this, Can someone please tell me how to configure it? searching the Cisco site for documentation is proving troublesome. Basically (and if i have this wrong please correct me) i want my clients to authenticate to a radius server when booting up so a rogue laptop cannot simply jack into my network if he gains access to Cat5 module that is patched into a switch. The majority of my hardware are 2950's
Solved! Go to Solution.
04-13-2006 03:46 AM
Hi,
You have to configure AAA on you switches.
Please see the link below for more details:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea7/scg/swauthen.htm
HTH, Please rate if it does.
-amit singh
04-13-2006 03:46 AM
Hi,
You have to configure AAA on you switches.
Please see the link below for more details:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea7/scg/swauthen.htm
HTH, Please rate if it does.
-amit singh
04-13-2006 04:38 AM
Thanks, this is exactly what i was looking for
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide