Other Security Subjects

i have  a customer with an application on board a server with a different ip address than the server , how do i route traffic to that internal ip? am i suppose to create a static route to the application ip and set the server ip as the next hop?   al...

I am preparing for my CCNA exams and can anyone of you out there send me sample exams questions or site where i can download this from.We dont have access to these here since we dont have an agent running these courses.I have worked on Cisco routers ...

We have a really small environment ~25 clients, 1 server, 1 switch (2960 48TS-L), I have a security implementation guide that deals with Layer 2 switches.   I need to configure an OOBM on a separate management VLAN from the client VLAN but both on th...

Hi,   After going through pretty much every document I could find on ACL-Paritions, I have a few questions I couldn't find answers to.   I have inherited 2 old 6500 switches with FWSM (in fail-over) - each FWSM with 12 contexts and 5 partitions. I ha...

I am looking to integrate the MX84 with AD server that is using the Microsoft server version 2008.   The settings have been correctly made in Meraki, but according to Meraki Support, the server returns error code 0x8004106c (Quota violation, while r...

Hello  We are using Micorosft NPS as Radius server and we already have implemented dot1x  user authentication and Dynamic vlan assignment on all 3750s. However, we are trying to get it working on Nexus 5k which directly connected to a 2k FEX.   Accor...

Is there a way to identify ports statically configured for access and that are not using 802.1x/mab for port authentication? We have a medium to large environment and will be deploying the command and or script to identify ports that have been static...

Hi everybody. I am a new learner. Could you please show me how to download vios_l2-adventerprisek9-m.vmdk.ssa.152.  I am very very confuse.     Thanks in advanced

Hi Team,   can someone help with this please   cisco AMP for endpoints 1.8 failing to start on CentOS Linux release 7.1.1503 (Core)   journal ctl shows following logs         -- Logs begin at Thu 2018-04-26 03:20:01 EDT, end at Mon 2018-08-13 06:15:1...

Hello all As you know, we can not apply ACL to L2 Etherchannel interfaces ! ( ON 3850 series ) So what is your solution if you want to do it? Can we apply ACL to member ports one by one rather than applying it to Port-channel interface? Does it work?...

Dear All   Regarding to the CVD -Deploying IWAN Public Key Infrastructure - the Root CA as a dedicated router: https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Sep2017/CVD-IWANPKI-Deployment-SEP17.pdf If you need the certificate based authenti...

I've already asked a similar question, but without a solution (not for me).On Cisco ASA, I can define a Bridge Virtual interface (BVI) and some physical port connected to this interface.I can make a NAT from outside to physical interface but no to th...