have you tried configuring two vlans on inteface with dhcp

[c.goona]

Hi All I need to create a internet segment on a pix for visitors to my office. I need the interface to hand out ip addresses(dhcp).problem is my pix 515 has all interfaces in use.

Can i set up 2 vlans on 1 interface and the use dhcp on the pix on one of the vlans?

I dont have a spare pix to try this out, anyone done this or can you try it for me?

[scoclayton]

Yes, you can now configure DHCP server instances per interface. Makes no difference if these are physical interfaces or logical interfaces.

Hope this helps.

Scott

[c.goona]

Thanks Scott i managed to get my hands on a pix firewall yesterday and try the commands for myself. It worked fine.

regards

colin goona

[pokwan]

Colin,

What commands were used? Can you please advise?

Thanks.

PF

[c.goona]

Hi

For the dhcp i used:

dhcpd address 192.168.100.2-192.168.100.100 vlan2

dhcpd dns 192.168.200.3

dhcpd wins 192.168.200.3

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd domain rdigest.com

dhcp enable vlan2

For the vlans look at this link for a realy good explanation http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a0080172786.html#1113411