Location A: ISP 188.8.131.52 with cisco WLC infrastructure and a normal LAN/WLAN network xxx.xxx.xxx.xxx
Location B: ISP 184.108.40.206 with a office extended access point (CAP2702)
The office extended access point on location B can easily connect to the WLC and LAN xxx.xxx.xxx.xxx from location A.
If you are in location B and connect with the office extended access point - is there a possibility to do ONLY authentication on the WLC which is located in location A but then after successful authentication use the ISP and LAN on location B? WLC just used for authentication.
After adding a WLC to ISE if you get the following error (See message below) after running debug aaa tacacs enable in the WLC. Incorrectly formatted authorization message Here's what you need to do to fix it. Login to ISE Work centers, Settings, Device ad...
Community Live- Understanding How Multicast Works with Cisco Wireless LAN Controllers
(Live event - formerly known as Webcast- Tuesday November 19, 2019 at 9 am Pacific/ 12 pm Eastern / 6 pm Paris)
This event will have place on Tuesday 19th, Novembe...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
New Version for the Wireless Lan Config Analyzer: v.4.4.14
Supports AireOS up to 8.8, any model.
Error parsing AP list with location with spaces
For tool information: