I am using below servers.
VSOM6.3.1 , VSMS 6.3.1 ,VSVM 6.3.1
Storage Server 1
HDD: 1*15 = 15 TB
HDD: 1*15 = 15TB
Problem: Unable to view Bosh auto dome 300 on to the VSOM.
Error Message displayed: Endpoint Error: Cam Unreachable.
Software Versions: VSMS 6.3.1 VSOM 6.3.1, Camera Firmware 3.52
Problem Description: Unable to view camera on VSOM and it can be viewable on web. I am having 40 bosh auto dome cameras and facing this error "Endpoint
Error: Cam unreachable". I tried removing/adding the camera several times but it did not help. Also tried restarting both the camera and VSMS server, actually I did fresh installation and I have lost all my configuration manuals.
SYSTEM LOG ERROR:
I have had this problem recently with entire locations of freshly installed, functional cameras.
Check your switches and vlan set ups to make sure the cameras are allowed to pass through!
first , did you add the camera with correct driver?
did you try configure camera with deferent compression ( h264, MPEG4). ( it should be same at camera and VSOM).
try to remove the camera , then add it by another name.
I know you probably have checked this but I had a similar issue and it was a password mismatch, I also had a similar problem on a Cisco 2500 camera and upgrade to firmware 2.1.7 solved this also.
Sent from Cisco Technical Support iPhone App