05-20-2011 07:24 AM
Hi, I am doing a recovery of the vsm with the dvd, and at the beginning of the installation it is asking me for a "system profile location".
I included a screenshot, I am not sure where or what this is asking for? Thanks for any assistance!
Solved! Go to Solution.
05-22-2011 08:01 PM
Hello Jeremy,
The Cisco Recovery DVD for Video Surveillance is meant to be used ONLY for the following Cisco hardware:
- CIVS-MSP-xxxx
- CPS-MSP-xxxx
It cannot be used for any other hardware type.
The error is indicating that a hidden file that has the information of the hardware characteristics is not found.
You can also receive this error if the ISO download was bad or the DVD drive is not up to specs.
If this is the above hardware, please try to re-download the ISO and ensure that you have good DVD Drive.
Harpreet Sandhu
05-20-2011 02:17 PM
Check this Link , It may Help:
05-22-2011 08:01 PM
Hello Jeremy,
The Cisco Recovery DVD for Video Surveillance is meant to be used ONLY for the following Cisco hardware:
- CIVS-MSP-xxxx
- CPS-MSP-xxxx
It cannot be used for any other hardware type.
The error is indicating that a hidden file that has the information of the hardware characteristics is not found.
You can also receive this error if the ISO download was bad or the DVD drive is not up to specs.
If this is the above hardware, please try to re-download the ISO and ensure that you have good DVD Drive.
Harpreet Sandhu
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide