11-25-2018 07:52 AM
Hi,
Someone can decribe me the all steps i should preform in order to excute ping between to networks.
-WAN settings
-Routing configuration
-PC NIC Configuration
The setup is: PC 1>WAN1 port, PC 2>WAN2 Port.
Thanks.
11-25-2018 11:58 AM
below guide give you basic settings :
https://notesfrommwhite.net/2015/04/23/install-and-configure-of-the-cisco-rv325-firewall/
Once you done that you can do same for other PC2 VLAN IP address.
11-26-2018 06:19 AM
Thanks.
But the implamentation should be via L3, i.e. static routing, WAN configuration etc, not by vlans etc.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide