RV345 temperature monitor

[EvanC75]

Hello,

Is there a way to monitor the temperature of the Cisco RV345 router?  I do have it in a climate controlled closet but I am still curious to see how hot it gets since it is fan-less.  I did see an old thread about this being a feature request on the old RV320 series routers.  But as of now, I don't see any such option, at least in the web console.

I was even thinking of mounting a 40mm usb exhaust fan on the side.

[balaji.bandi]

Not tested my self, Download the MIB as below Link and try snmpwalk see if you get any results :

https://software.cisco.com/download/home/286288298/type/282465797/release/1.0.1

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb4127-configure-simple-network-management-protocol-snmp-on-rv320-a.html

[EvanC75]

Thanks I will try that out.  Does it matter which SNMP version I use?

[balaji.bandi]

no the version not matter results will be the same v3 is more secured. but v2c still good.

[EvanC75]

Please forgive my ignorance, but I have never used SNMP before.  I setup SNMPv3 and v2c on the router and set a name, contact, and location.   Then set a trap IP and port then applied.

However, I don't know what to do next and I don't know what to do with that MIB download you linked to.  I tried SNMPWalk from SolarWinds but I just get device not responding.

[balaji.bandi · Accepted solution]

SNMP port 161 (162 is for trap) is the port, i do not where you mentioning this community here ?

i use other snmp test tool its free always handy

https://www.paessler.com/tools/snmptester