Hi guys,
We have a Cisco 1841 IOS version 12.4(24)T ADSL software 3.0.014 that is experiencing synchronization issues. It has been recommended to upgrade to a later version of the ADSL software.
Can anyone give me any information on what is the most current stable version as there appears to be quiet a few that people have still had issues with.
Please see below output.
#show dsl interface atm0/0/0
ATM0/0/0
Alcatel 20190 chipset information
ATU-R (DS) ATU-C (US)
Modem Status: Showtime (DMTDSL_SHOWTIME)
DSL Mode: ITU G.992.5 (ADSL2+) Annex A
ITU STD NUM: 0x03 0x2
Chip Vendor ID: 'STMI' 'IFTN'
Chip Vendor Specific: 0x0000 0x71C8
Chip Vendor Country: 0x0F 0xB5
Modem Vendor ID: 'CSCO' ' '
Modem Vendor Specific: 0x0000 0x0000
Modem Vendor Country: 0xB5 0x00
Serial Number Near: FOC14437WV4CISCO73108850
Serial Number Far: Chip ID: C196P (1) capability-enabled
DFE BOM: DFE3.0 Annex M (3)
Capacity Used: 98% 100%
Noise Margin: 6.0 dB 6.0 dB
Output Power: 20.0 dBm 12.5 dBm
Attenuation: 38.0 dB 20.0 dB
FEC ES Errors: 0 0
ES Errors: 1 0
SES Errors: 1 0
LOSES Errors: 1 0
UES Errors: 0 803
Defect Status: None None
Last Fail Code: None
Watchdog Counter: 0x4A
Watchdog Resets: 0
Selftest Result: 0x00
Subfunction: 0x00
Interrupts: 3821779 (0 spurious)
PHY Access Err: 0
Activations: 2
LED Status: OFF
LED On Time: 0
LED Off Time: 0
Init FW: init_AMR-3.0.014_no_bist.bin
Operation FW: AMR-3.0.014.bin
FW Source: embedded
FW Version: 3.0.14
DS Channel1 DS Channel0 US Channel1 US Channel0
Speed (kbps): 0 6655 0 1027
Cells: 0 23636 0 260968693
Reed-Solomon EC: 0 9561 0 0
CRC Errors: 0 7 0 0
Header Errors: 0 4 0 0
Total BER: 0E-0 7305E-12
Leakage Average BER: 0E-0 4806E-18
Interleave Delay: 0 60 0 2
ATU-R (DS) ATU-C (US)
Bitswap: enabled enabled
Bitswap success: 0 0
Bitswap failure: 0 0
LOM Monitoring : Disabled
Thanks,
Shaun
