04-26-2010 09:56 AM - edited 03-04-2019 08:17 AM
We are considering upgrade of our 1800 series integrated services router to a 1900 series. We have port FE1 on our 1812 configured as a WAN interface using PPPoE to a typical cable modem. Can one of the standard Ethernet ports on the 1941 be configured the same way, or do we need to buy a WAN interface module? If so what type? Thanks!
Solved! Go to Solution.
04-26-2010 12:43 PM
As mentioned above, identically except naming.
Please remember to rate useful post clicking on the stars below.
04-26-2010 11:58 AM
No, just use an identical configuration.
04-26-2010 12:13 PM
So are you saying that the two gigabit Ethernet ports that come standard on the 1941 can be configured in a similar manner to the first two ports (FE0 and FE1) on the 1812? Thanks.
04-26-2010 12:43 PM
As mentioned above, identically except naming.
Please remember to rate useful post clicking on the stars below.
04-26-2010 01:11 PM
Thanks! I will give it a try.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide