1921 module questions

[Tippey]

Hello, 

Just a quick question

We have a 1921 which is obviously now out of support.

Our customer is now needing an extra gigabit port or two for their LAN network (both on the router are in use)

Just trying to see what module would be suitable as im getting so lost starting at all the specs for this or if new hardware would be more beneficial with that has taken over form the 1921's

Any help would be much appreciated or a point in the right direction :)

[Seb Rupik]

Hi there,

Take a look at the EHWIC-4ESG :

https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/qa_c67-612908.html

..or EHWIC-1GE-SFP-CU if you need fibre connectivity:

https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/high-speed-wan-interface-cards/data_sheet_c78-660124.html

cheers,

Seb.

[Tippey]

Thanks for the reply

Will pass the option of https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/high-speed-wan-interface-cards/data_sheet_c78-660124.html to them.

Is there a new alternative to the 1921 with same/similar features with multiple ports?

[Seb Rupik]

The EoL sheets for a device are always a great place to look:

https://www.cisco.com/c/en/us/products/collateral/routers/1900-series-integrated-services-routers-isr/eos-eol-notice-c51-740520.html

...in your case the C1111-8P is the recommended replacement:

https://www.cisco.com/c/en/us/products/collateral/routers/1000-series-integrated-services-routers-isr/datasheet-c78-739512.html

cheers,

Seb.

[luis_cordova]

Hi @Tippey 

Check this model

ISR4431/K9

https://www.cisco.com/c/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/data_sheet-c78-732542.html

Regards

[Leo Laohoo]

The question is what is the WAN bandwidth?