06-20-2007 08:34 AM - edited 03-03-2019 05:31 PM
When copying a 2GB file on a Multilink that has 5942 Kb available only uses 1.5Kb
06-20-2007 11:08 AM
Hello,
Can you try "ppp multilink fragment size 500" ?
06-21-2007 12:53 PM
The IOS of the router on the other end does not support this change. I am in the process of upgrading that IOS to the latest version
06-21-2007 01:21 PM
Good luck and let us know if it works.
07-06-2007 12:48 PM
Did not work, very small improvement to 1.14 Mb during a 2GB file copy.
07-06-2007 12:51 PM
Has the router config changed ? What is the config of the router on the side that has the file being transmitted ?
07-06-2007 12:57 PM
07-06-2007 02:05 PM
Hi,
I do not see "ppp multilink fragment size 500" under any interface, where di you configure it ?
Also, would you send "show controllers e1" to rule out any physical problem. It appears the vwic modules have not been but in clocking domain as required.
07-09-2007 05:36 AM
07-09-2007 05:54 AM
Hi,
Your E1 lines are clean, there is no need for "network-clock-participate".
Now, what IOS are you using? Please include "show version".
"ppp multilink fragment size" is available on from 12.2(4)T onwards. With previous releases, you can only configure the "ppp multlink framgment delay" in order to indirectly set the fragments size.
Also please include "show interface", "show buffers".
07-10-2007 12:21 PM
I did send you this, right?
Did you find anything?
07-10-2007 12:52 PM
Hi,
No, I didn't saw "show version", or "show interface" on both routers. My suspicion is that the fragment is not set small enough.
07-10-2007 01:04 PM
07-10-2007 01:08 PM
07-10-2007 01:29 PM
Hi,
the bundle members are balancing quite well and the input error ratio is reasonable.
The thing is that you cannot set the fragment size directly because you have upgraded to 12.4 mainline, not 12.4 T, where the command is supported starting from 12.4(4)T.
If you do not want to upgrade again, try setting "ppp multilink fragment delay 20"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide