07-19-2013 07:43 AM - edited 03-04-2019 08:30 PM
Hi,
We have just installed 2 new 3850 switch in a stack.
Everything went fine and now I have some error logs in loop.
Jul 19 16:30:41.388 CE: %NGWC_PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply A removed
Jul 19 16:30:41.743 CE: %NGWC_PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply A inserted
Jul 19 16:30:41.744 CE: %NGWC_PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply A powered on
SWR-3850-RO-SS-12#
Jul 19 16:30:46.966 CE: %NGWC_PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply B removed
Jul 19 16:30:47.351 CE: %NGWC_PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply B inserted
Jul 19 16:30:47.351 CE: %NGWC_PLATFORM_FEP-6-FRU_PS_OIR: Switch 1: FRU power supply B powered on
I understand this logs but I don't know am I receiving it.
I've tried to unplug and plug again the 2 power supply but I still get this messages.
I also tried to invert a power supply from switch 1 to switch 2 and I still get this message for Power supply A and B of switch 1
This meams the power supply seems to work.
So it may be a problem with switch 1
Any idea ?
Best regards,
Nicolas
07-19-2013 10:25 PM
could you please get the output of show environment power all' command.
Regards
Inayath
07-20-2013 02:42 AM
Hi,
If I repeat this command several times I can see that when the error message come I have this
SWR-3850-RO-SS-12#sh environment power all
SW PID Serial# Status Sys Pwr PoE Pwr Watts
-- ------------------ ---------- --------------- ------- ------- -----
1A PWR-C1-350WAC DCB1650H090 OK Good Good 350
1B Unknown Unknown OK Good Good 235
2A PWR-C1-350WAC DCB1650H00K OK Good Good 350
2B PWR-C1-715WAC LIT17050CEY OK Good Good 715
And just after the error message :
SWR-3850-RO-SS-12#sh environment power all
SW PID Serial# Status Sys Pwr PoE Pwr Watts
-- ------------------ ---------- --------------- ------- ------- -----
1A PWR-C1-350WAC DCB1650H090 OK Good Good 350
1B PWR-C1-715WAC LIT17050CDX OK Good Good 715
2A PWR-C1-350WAC DCB1650H00K OK Good Good 350
2B PWR-C1-715WAC LIT17050CEY OK Good Good 715
09-26-2014 08:28 AM
Was looking at a similar issue and found
CSCug23120
The show environment power all command randomly displays a power supply failure message and displays the wattage is displayed incorrectly as 235 W.
There is no workaround.
Resolved in IOS XE Release 3.2.2SE
06-28-2016 10:10 AM
Hey guys,
Does anyone know where to get the all the system messages error guide that a 3850 can generate? They have the guides for all the other platforms, but I am not able to find them for the 3850.
Similar to the %NGWC_PLATFORM_FEP-6-FRU_PS_OIR above. It's just a list of all the messages that get logged on a switch like Power supply fail, or bpdu guard, or ospf errors...etc..
Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide