4000 series throughput and intervlan routing using switchcard

[JeffC]

Can someone please clarify for me...

If I have a 4k router with a WAN connection on a routed port (100Mbps), and a switchcard in it with multiple LAN subnets terminating on SVIs. Does the inter-vlan traffic count towards the throughput license?
For example if you have a servers on one subnet and hosts on the other communicating at 1Gbps, will this exhaust the license on a 4331? 

[mvsheik123 · Accepted solution]

Hi Jeff,

Per documentations, it does not use the platform performance license throughput. 

https://www.cisco.com/c/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/data_sheet_c78-612808.html

Check 'Multigigabit Fabric' section. It clearly states "Throughput for direct module-to-module traffic using the MGF will thereby not be limited by the platform’s performance license levels."

Also Table.2   section "Intrachassis stacking or cascading" also provides some info on this.

hth

MS