11-01-2018 10:21 AM - edited 03-05-2019 11:01 AM
Hi,
I purchased a license for my4331 router. bandwidth feature, got the lic file and installed it on router successfully
I changed the throughput to 300000 and restarted router and now it is working but the weird thing is that I still see the feature as evaluation and an expiring time. Am I missing any other command here?
Or transition means that after eval it will be activated permanently and I should not worry
show license detail throughput
Feature: throughput Period left: 8 weeks 3 days
Index: 1 Feature: throughput Version: 1.0
License Type: EvalRightToUse
License State: Active, In Use
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 3 days
Period used: 24 minutes 38 seconds
Transition date: Dec 31 2018 17:06:08
License Count: Non-Counted
License Priority: Low
Store Index: 6
Store Name: Built-In License Storage
Solved! Go to Solution.
11-01-2018 10:27 AM
11-01-2018 10:27 AM
11-01-2018 10:36 AM
Hi,
If you installed successfully than it will auto changed after 8 weeks.
Regards,
Deepak Kumar
03-25-2020 07:28 AM - edited 03-25-2020 07:44 AM
Hello,
You have the possibility to directly move to Permanent mode instead of wait for the 60 days :
#license right-to-use move throughput
If you are not invited to accept end user agreement, either you already accepted it or you can do it with :
(config)#license accept end user agreement
No need to reload if you already changed the throughput (for which a reload is mandatory to take effect). For those who ask, you can change the throughput with this command :
(config)#platform hardware throughput level <value in kbps>
Hope this helps.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: