01-07-2022 08:54 PM - last edited on 01-09-2022 08:43 PM by Translator
Hi
I have an ASR 903 RSP3. when it tries to boot up, the following log appears on the console:
Image loaded
Boot image size = 518430927 (0x1ee6a0cf) bytes
I2C Bus busy, please check the BP IDPROM
get_mac_addr: Couldn't find a valid macaddrI2C Bus busy, please reset to attempt recovery 1
I2C Bus busy, please check the BP IDPROM
reading the ARAD pid failed..
Failed to get ARAD PID
I2C Bus busy, please check the BP IDPROM
unable to find the pid string..
RSP, chassis hw mismatch found
boot: error executing "boot usb0:asr900rsp3-universalk9.16.08.01c.SPA.bin"
Is this an HW error or what?
Thank you
Solved! Go to Solution.
01-07-2022 11:16 PM
It May be a hardware error at this stage, what IOS Code running, try upgrading to the latest, or contact TAC for assistance if you have a contract.
01-07-2022 09:38 PM
CSCuq68960
01-08-2022 12:05 AM
HI
I am using IOS version 03.18.01.S or Version 15.6(2)S1..
01-08-2022 12:33 AM
@Peyman Zadmehr wrote:
HI
I am using IOS version 03.18.01.S or Version 15.6(2)S1..
TAC rarely updates the Affected Versions and Known Fixed Version list.
It is best to raise a TAC Case and get them to verify.
01-08-2022 01:09 AM
Hello,
just out of curiosity, how did you get this resolved, which IOS version did you install to fix this ?
01-07-2022 11:16 PM
It May be a hardware error at this stage, what IOS Code running, try upgrading to the latest, or contact TAC for assistance if you have a contract.
01-08-2022 12:11 AM
- FYI : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCub60284
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide